设为首页收藏本站
开启辅助访问
官方QQ群:
222086777
在线客服:
客服一
客服二
微信18611889918
官网地址: acac.net.cn

种学积文

 找回密码
 立即注册

QQ登录

只需一步,快速开始

搜索
热搜: 活动 交友 discuz
换热器设计服务
塔模拟计算服务
查看: 94|回复: 0

沼气湿法脱硫888法的技术特点

[复制链接]

2829

主题

2914

帖子

9221

积分

管理员

Rank: 9Rank: 9Rank: 9

积分
9221
发表于 2023-5-11 01:23:02 | 显示全部楼层 |阅读模式
沼气湿法脱硫888法的技术特点
Technical characteristics of methane wet desulfurization 888 method
湿式氧化法脱硫的工艺流程中加入888脱硫催化剂后就称为888法脱硫。888法的特点与888脱硫催化剂的特点是不相同的,比如“888”本身不脱硫,不存在工作硫容,但把“888”加入到弱碱溶液中组成脱硫循环液后,脱硫运作时,就存在工作硫容。
The process flow of wet oxidation desulfurization is called 888 desulfurization after 888 desulfurization catalyst is added. The characteristics of 888 method are different from those of 888 desulfurization catalyst. For example, "888" itself does not desulfurization and does not have working sulfur capacity. However, after "888" is added to weak alkali solution to form desulfurization circulating liquid, there will be working sulfur capacity during desulfurization operation.
可以归纳为888法的特点有十个。
It can be concluded that there are ten characteristics of 888 method.

1、工作硫容高,脱硫效率高
1. High working sulfur capacity and high desulfurization efficiency
2、具有**和解决硫磺堵塔的功能
2. It has the function of * * and solving sulfur tower blockage
3、具有脱有*硫的功能,脱硫率为50%到80%
3. It has the function of removing sulfur, and the desulfurization rate is 50% to 80%
4、有脱高硫气的功能
4. It has the function of removing high sulfur gas
5、副反应生成率低,纯碱消耗低,硫回收率高,脱硫费用低
5. The side reaction generation rate is low, the consumption of soda ash is low, the sulfur recovery rate is high, and the desulfurization cost is low
一般副反应生成率在3%以下,有些厂应用“888” 后,溶液中Na2S2O3含量还出现下降值。6、溶液组成简单,管理与操作方便
Generally, the generation rate of side reaction is less than 3%. After the application of "888" in some plants, the content of Na2S2O3 in the solution also decreases. 6. The solution has simple composition and convenient management and operation
脱硫液除了吸收剂外,脱硫催化剂只有一种即“888”。 所以溶液组份对脱硫过程的影响因素单纯,容易调节。
In addition to absorbent, there is only one desulfurization catalyst, namely "888". Therefore, the influence factors of solution components on desulfurization process are simple and easy to adjust.
7、催化剂活*好,用量少,消耗低,运行经济
7. Good catalyst activity, less consumption, low consumption and economic operation
通常情况下每脱除1kg HS需耗“888”0.5-0.9克,有些比这个数还要低。
Generally, 0.5-0.9g of "888" is required to remove 1kg of HS, some of which are lower than this number.
8、贫液悬浮硫低,溶液清亮有利于节能
8. Low suspended sulfur in lean solution and clear solution are conducive to energy saving
9、应用范围广
9. Wide application range
可应用半水煤气、富氧气化的煤气、甲醇原料气、变换气、焦炉气、城市煤气、
Semi water gas, oxygen enriched gasification gas, methanol feed gas, shift gas, coke oven gas, city gas
沼气等含硫气体的脱硫;加压、常压脱硫均可以应用。
Desulfurization of sulfur-containing biogas; Pressurized and atmospheric desulfurization can be applied.

回复

使用道具 举报

您需要登录后才可以回帖 登录 | 立即注册

本版积分规则

QQ|Archiver|手机版|小黑屋|种学积文 ( 京ICP备16043396号-6 )

GMT+8, 2024-11-23 01:44 , Processed in 0.093750 second(s), 24 queries .

Powered by Discuz! X3.4

Copyright © 2001-2020, Tencent Cloud.

快速回复 返回顶部 返回列表